Variant 1: PF7– 42V AC– 3-phase monitoring relay up to 1,250 V AC

                 ELMI-Artikelnummer  01905000

Variant 2: PF7–110V AC– 3-phase monitoring relay up to 1,250 V AC

                 ELMI-Artikelnummer  01904000

Variant 3: PF7–230V AC– 3-phase monitoring relay up to 1,250 V AC

                 ELMI-Artikelnummer  01906000

Note:

“The operating instructions and further technical data will be sent with your purchase.”

ELMI-Elektronik GmbH

Höfer Ohl 12, 51645 Gummersbach

Amtsgericht Köln HRB 45688
Geschäftsführer: Walter Schrader / Cathrin Schmitt ppa.

Ust-ID DE 241143449 • StNr. 212/5724/2111

Tel.: +49 (0)2261 / 994260 – 50 • Fax: +49 (0)2261 / 994260 – 60

02261-994260 50 Zentrale

02261-994260 60 Fax

02261-994260 51 – Technik/Produktion

info@elmi-elektronik.com

• Information on the PF7 Phase Sequence Monitoring Relay

The PF7 phase sequence monitoring relay has been specifically developed for installation in switchgear used in potentially explosive atmospheres in industrial plants.

• Due to the 3 phase AC, 50 Hz, mains voltage to be monitored with a max. possible rated operating voltage of max. 1,250 V AC (1,140 V AC +10%) the entire installed electronics inside the protective housing were fully encapsulated with insulating casting compound due to the high dielectric strength of the measuring input.

  – The test voltage of the manufactured module is: 3 AC, 50 Hz, 1250 VA AC

Manufacturer’s address

Production group

SBE- Schrader Bergbau Elektrik

Höfer Ohl 12

D-51645 Gummersbach

Holder of distribution rights

ELMI Elektronik GmbH

Höfer Ohl 12

D-51645 Gummersbach

Kontakt

Telefon:        +49 (0)2261-92053-0

Telefax:        +49 (0)2261-92053-29

Email:           walter.schrader@elmi-elektronik.com

Spare parts and customer service

See manufacturer’s address

Copyright and intellectual property rights for the Phase Sequence Monitoring Relay

All copyrights and intellectual property rights for the phase sequence monitoring relay PF7 are the property of SBE-Schrader Bergbau Elektrik.

http://www.sbe-schrader.de/

• Warranty and Liability

Our General Terms and Conditions of Sale and Delivery apply. Warranty and liability claims for personal injury and/or property damage are excluded if they are due to one or more ft he following causes:

1.3     Intended Use of the Phase Sequence Monitoring Relay

Intended use also includes compliance with the operating, maintenance, and repair conditions specified by the manufacturer.

The phase sequence monitoring relay PF7 is used to monitor three-phase networks in switching and monitoring devices for three-phase electric motors in industrial plants.

Proper use also includes observing and complying with all information and instructions in this operating manual, as well as observing the relevant accident prevention regulations by the user at the place of use.

1.4     Improper Use

Use that differs from or exceeds that stated in the previous section is considered improper.

Improper use may result in danger. The user is solely liable for any dangers or damage resulting from improper use.

Dangers of use

 Failure to follow these safety instructions may result in danger to persons, the environment, and the device. Failure to follow these safety instructions will void any right to compensation.

1.5     Structural changes

It is not permitted to make any structural modifications to the PF7 phase sequence monitoring relay.

Unauthorized modifications are strictly prohibited.

It is not permitted to modify the PF7 phase sequence monitoring relay or use it for purposes other than those intended.

GO BACK UP !
 

The post Phase Sequence Monitoring Relay first appeared on Elmi-Elektronik & SBE-Schrader-Bergbau-Elektrik.